Functions: | |
---|---|
Quantity: | |
Specification of freeze fat machine:
Model | ETG15-4 |
Function | Body slimming/ fat reduction |
Handle piece | 4 different size handles(100,150,200,300) |
CRYO | -9°~5° |
Cooling device output pressure | 0-100KPa |
Vacuum | 10-80Kpa |
Default time | 0-120min |
Cooling liquid | pure water |
Certification | CE |
OEM & ODM | Avaliable |
Material | ABS |
Cryolipolysis is cheap, no dangerous surgery, no anesthesia, almost no side effects. Even after the first treatment with the device, initial success can also be achieved. For example, it is not uncommon to reduce waist circumference by as much as 4-6 cm. Cryolipolysis for fat removal is the future.
Advantage of fat freezing machine:
1. Fat freezing machine has reheating function, green LED and red LED, and the tailor made antifreeze membranes, all of these will help the clients avoid frostbit during treatment.
2. 4 therapy heads with different sizes (100,150, 200,300).
3. Newest size 300 handle can be use for specific client.
4. Two handles can be used at the same time.
5. Vacuum pump imported from Germany.
6. New cooling system for better skin protection.
7. the lowest treating temperature is up to -9 degree centigrade.
8. treating temperature can be changed intelligently.
9. Autometic massage during treatment make the whole process enjoyable.
Treatment Area:
Abdomen and flanks or inner thighs.
Fit on curved or narrow parts od the body.
Large area fat parts of body.
FAQ:
Q: How long is the treatment?
A: During your consultation, your doctor will discuss how much time should be allotted based on your individual treatment plan. A typical treatment can last between 45 minutes to one hour.
Q: Can i return to normal activities after my treatment?
A: Yes you can. The procedure is completely non-surgical, so typically you can return to normal activities immediately. Some patients experience redness, minor bruising, tingling, numbness or discomfort in the treated area, but this is temporary and will resolve completely. Often times, patients return to work after the session is over.
Q: What will my results be?
A: Typically, each cryolipolysis treatment results in a noticeable reduction of fat in the treated area. After the initial treatment is complete, you can attain further reductions with additional treatments, resulting in even more fat loss. Some patients find that just one treatment fully addresses their goals.
Q: If not work, what warranty do you have?
A: 3 years warranty for machine body, 6 months warranty for handle. If stop working, you can contact me in time, shooting video and take pictures, I will reflect the problem for our engineer in the first time. Give you the answer in one day.
Specification of freeze fat machine:
Model | ETG15-4 |
Function | Body slimming/ fat reduction |
Handle piece | 4 different size handles(100,150,200,300) |
CRYO | -9°~5° |
Cooling device output pressure | 0-100KPa |
Vacuum | 10-80Kpa |
Default time | 0-120min |
Cooling liquid | pure water |
Certification | CE |
OEM & ODM | Avaliable |
Material | ABS |
Cryolipolysis is cheap, no dangerous surgery, no anesthesia, almost no side effects. Even after the first treatment with the device, initial success can also be achieved. For example, it is not uncommon to reduce waist circumference by as much as 4-6 cm. Cryolipolysis for fat removal is the future.
Advantage of fat freezing machine:
1. Fat freezing machine has reheating function, green LED and red LED, and the tailor made antifreeze membranes, all of these will help the clients avoid frostbit during treatment.
2. 4 therapy heads with different sizes (100,150, 200,300).
3. Newest size 300 handle can be use for specific client.
4. Two handles can be used at the same time.
5. Vacuum pump imported from Germany.
6. New cooling system for better skin protection.
7. the lowest treating temperature is up to -9 degree centigrade.
8. treating temperature can be changed intelligently.
9. Autometic massage during treatment make the whole process enjoyable.
Treatment Area:
Abdomen and flanks or inner thighs.
Fit on curved or narrow parts od the body.
Large area fat parts of body.
FAQ:
Q: How long is the treatment?
A: During your consultation, your doctor will discuss how much time should be allotted based on your individual treatment plan. A typical treatment can last between 45 minutes to one hour.
Q: Can i return to normal activities after my treatment?
A: Yes you can. The procedure is completely non-surgical, so typically you can return to normal activities immediately. Some patients experience redness, minor bruising, tingling, numbness or discomfort in the treated area, but this is temporary and will resolve completely. Often times, patients return to work after the session is over.
Q: What will my results be?
A: Typically, each cryolipolysis treatment results in a noticeable reduction of fat in the treated area. After the initial treatment is complete, you can attain further reductions with additional treatments, resulting in even more fat loss. Some patients find that just one treatment fully addresses their goals.
Q: If not work, what warranty do you have?
A: 3 years warranty for machine body, 6 months warranty for handle. If stop working, you can contact me in time, shooting video and take pictures, I will reflect the problem for our engineer in the first time. Give you the answer in one day.
Home | Products | About Us | Contact Us | News